Have Fun Training Your Dog New Tricks!

[Updated February 5, 2019]

One of the many things I love about today’s dog training world is that now, thanks to our culture’s paradigm shift toward positive reinforcement-based training, a lot more people are having fun teaching their dogs to do tricks. Once a mere afterthought in training, fun is now taking center stage as more trainers offer classes in “just” tricks, and encourage their clients to get creative with the behaviors they teach their dogs. In fact, there are even canine titles to be earned in tricks! Kyra Sundance, a stunt dog trainer/performer and author, offers five levels of Trick Dog titles through her Do More With Your Dog program, from Novice Trick Dog to Trick Dog Champion.

We have gone far beyond the “Sit, Shake, Sit Pretty, Roll Over” list of basic tricks, although these are still favorites with many dog owners. Today’s trick-trained dog can play an electronic keyboard, roll himself up in a blanket, put bottles in a recycling bin, and much more. Here are some of my favorite creative tricks that you can teach your dog. All you need to get started are your dog, a clicker (or verbal marker), treats, and any props your chosen trick entails.

Leg Weaves

Dog trainer Pat Miller

For this trick, your dog weaves in and out of your legs every time you take a step forward. No props are needed for this one, and it’s a pretty easy trick for most dogs.

– Start with your dog sitting at your left side. Put your right foot forward.

– To lure, put a treat in your right hand and offer it to your dog under your thigh, behind your right leg. As he moves toward the treat, pull it back away from him so he follows it under your leg. Click and treat. (He should move across in front of you.)

– Put your left foot forward and repeat the action with the treat in your left hand this time. Or, you can ask him to target to your hand or a target stick held behind your leg, rather than using a lure.

– If he’s hesitant to follow the lure or target under your leg, toss the treat behind you as he starts under, until he’s moving more easily – then have him follow the lure or target.

– As soon as he’s moving smoothly under your legs, add your cue, and fade the lure or target. Eventually you will only need to cue the first step – after that your steps forward become the cue for him to continue weaving. Look – you’re dancing with your dog!

If you want to use a target stick for this trick, teach your dog to target! See “Utilizing Target Training,” WDJ January 2007.

Check out this video by San Diego, California, trainer Emily Larlham, owner of Dogmantics dog training and the Kikopup Youtube channel, showing how she teaches a dog to do leg weaves.

Say Your Prayers

Pat Miller dog training

Pat Miller dog training

Pat Miller dog training

This trick is cute: On cue, your dog goes to a bench, sits, puts his paws up on the bench, then drops his nose between his paws as if he’s saying his prayers.

– Have your dog sit in front of his prayer bench. Encourage him to put his paws on the bench; he will probably stand up to do this. That’s okay! Click and treat when his paws are on the bench.

– While he is standing with his paws on the bench, ask him to sit. He will probably try to remove his paws from the bench in order to sit. That’s okay! Click and treat for any movement toward a sit before his paws come off the bench.

– Alternate repetitions of both behaviors (paws on the bench from a sit, and sit while standing with paws on the bench). As you gradually shape each behavior they will eventually meet in the middle and he will be able to sit with his paws on the bench.

– When he will remain seated with his paws on the bench, hold a treat in front of his nose with one hand to keep him in place while you move a second treat underneath and between his front legs with your other hand.

– Lure his nose down with your first treat until his nose reaches your second treat, then lure his nose down slightly between his front legs. Click (or use your verbal marker) and treat.

– When you can easily lure his nose between his legs, add your verbal cue, “Say your prayers!” and gradually lure less and less, until he can say his prayers on cue.

Pups in a Blanket

For this more challenging trick, your dog lies down on a blanket, grasps the corner of the blanket in his mouth, and rolls over to wrap himself up. For the best success, teach rolling over and blanket-grasping separately, then put them together.

Roll Over:

– Ask your dog to lie down. Kneel or squat next to your dog.

– Use a treat in your hand to encourage your dog to roll flat onto one side (if he is already rolled onto one hip be sure to continue in the same direction) by moving the lure in a “C” shape toward his ribcage, then up to his spine. Repeat until he easily moves into the flat-on-his-side position. (I call this position “Relax.”)

– From “Relax,” encourage your dog to turn tummy side up using your treat lure. Place the lure at the end of his nose and move it up in a half-circle above his head. As soon as he shifts so his legs lift off the floor ever so slightly, click and treat. Gradually increase the amount of the arc until he is turning onto his back, and then all the way over. Once the dog passes the point of equilibrium, gravity takes over and the roll just happens.

– Go slowly; some dogs get a little worried when they feel themselves rolling over. Make sure your dog is comfortable at each new step before asking him to roll a little farther.

Grasp the Blanket:

– Have your dog lie down on the blanket. If he already knows a “Take it!” cue, offer him the corner of the blanket and ask him to take it. If he doesn’t, encourage him to play with the corner of the blanket, then click and treat any time he puts his mouth on it.

– When he’ll grasp the blanket with his teeth, add your “Take it!” cue. Gradually increase duration until he is holding the blanket in his teeth for several seconds.

– Alternatively, you can fold a treat into the corner of the blanket and click and treat when he grabs it with his teeth. Add your cue, and gradually increase duration until he is holding the blanket in his teeth for several seconds.

dog in blanket

Combine the Behaviors:

– When he knows both behaviors well, put them together. Start by having him lie down on the blanket.

– Give him your “Take it!” cue, and when he is holding the blanket in his teeth, cue him to “Roll Over.”

– If he keeps hold of the blanket and rolls over, click, treat and party!

– It is more likely that at first he will probably drop the blanket and roll over. Watch him closely, and click just before he drops the blanket. If he drops it before he rolls over at all, just try again.

– Repeat this step, gradually increasing duration of the blanket hold until he will keep it in his teeth while he rolls all the way over. Pup’s in a blanket!

6 More Dog Tricks!

1. Take a Bow: Use the food lure (or touch target) as if asking for a “down.” Move the food just a little at first, so only his front end lowers. Gradually move the treat lower and lower until the front end is all the way down but the hind end is still up.

2. Crawl: Have the dog lie down, then move the lure or target forward slowly, close to the ground, to encourage the dog to follow it without getting up.

3. Jump Over (or Through) My Arm(s): Kneel facing a wall, two feet away, with your dog on your left side. Touch the fingers of your left hand to the wall, arm low. Use the lure or target in your right hand to encourage him to jump over your arm. With your dog on your right side, switch arms and do it again.

4. Spin/Twirl: Move the lure or target in a slow circle at the dog’s nose level, so the dog can follow. Use different words for left- and right-hand circles.

5. Side Pass: With the dog standing in front of you, use a lure or target to keep her nose centered in front of you and slowly step sideways.

6. Dance: Hold the lure or target the height of the dog’s body length off the ground. When the dog stands on her hind legs, move the lure/target as if asking for a spin.

Other Trainer Favorites

Some of my trainer friends shared their favorite dog tricks with me:

Valerie Balwanz, PMCT, CPDT-KA Pampered Pets, Charlottesville, VA

dog touch training

Photo courtesy of Valerie Balwanz

“My favorite thing to teach the dogs in my tricks class is to hit buzzers that make funny sounds with their paws. Some of the buzzers make animal sounds, mooing like a cow or crowing like a rooster. Others make cartoon-like ‘Boing!’ or honking sounds. Once the dogs have mastered this trick, the classroom explodes into a cacophony of amusing sounds. This gets everyone laughing.”

You can also do this trick using talking buttons, like the Staples “That Was Easy” Button.

Balwanz recommends using shaping to teach this trick. (See “Fun Training Techniques,” WDJ March 2006.) But first, make sure the dog isn’t concerned about the sound the buzzer makes. Push the buzzer, feed a treat. Repeat this several times and watch for signs of stress. For dogs who are concerned about the sound, use a push-on night light in place of the buzzer. Then start shaping:

– Click and treat for any movement toward the buzzer. This could include looking toward the buzzer, leaning toward the buzzer, or actually moving toward the buzzer.

– When you are starting to get consistent movement toward the buzzer, raise your criteria, and only click/treat for any foot movement toward the buzzer.

– When you are getting lots of foot movement, select which foot you want the dog to use and then only click/treat specific right- or left-foot movement toward the buzzer.

– When you are seeing consistent movement of your chosen foot, raise your criteria again, and click/treat for right-foot movements within six inches of the buzzer.

– Your next criteria might be to click/treat for right-foot movements within three inches of the buzzer.

– Then click/treat for right-foot movements within one inch of the buzzer.

– Then only click/treat for right-foot movements that touch the buzzer anywhere.

– Then only click/treat righ- foot movements that touch the buzzer on top.

– Finally, click and treat right-foot movements that touch the buzzer on top and are hard enough to make it make noise.

Once your dog performs this last step consistently, name the behavior (put it on cue). Balwanz asks her students to make up their own cue for this behavior. “My students understand that we always get behavior before we name behavior, so once their dog is hitting the buzzer, they can call it anything they like. This encourages them to be creative. I enjoy hearing the funny cues they invent!”

Following are links to various sources for buzzers and buttons. Some office supply stores sell “front desk” bells, which are also fun to use for this trick.

Animal sound buzzers are available here.
Get fun sound buzzers here.
Purchase talking buttons here.
Sharon Messersmith, Canine Valley Training Facility, Reading, PA

dog training

Photo courtesy of Sharon Messersmith

“My favorite trick to teach dogs to play is ‘Peek-a-Boo’ between the owner’s legs,” Messersmith says. “It gets the most reaction from kids and adults when I’m doing a therapy visit or just trying to make someone laugh.”

– Stand in front of the dog with your back to him, your feet wide enough apart so the dog can put his head through your legs. Hold a treat at the dog’s nose level in front of you to lure him through your legs. Make sure you only put it far enough so he comes through to his shoulders. As the dog is walking toward the treat, mark the behavior with a click or the word, “Yes,” and treat your dog.

– Repeat the first step until your dog starts to offer the behavior a few times. Then you can start to add the cue “Peek-a-Boo” as your dog is walking between your legs, but before you mark the behavior with a click or “Yes.”

– When your dog is reliably walking through your legs (eight out of 10 tries), begin to fade the lure. Stand in front of your dog with feet apart and say, “Peek-a-Boo.” When your dog starts to walk through your legs, click or say, “Yes” and feed a treat. If your dog doesn’t walk through your legs after being cued, wait three seconds, then lure him through.

– As you continue to practice this trick, your dog will need less of a lure. Continue to fade the lure until he will do Peek-a-Boo reliably on cue. Click and treat!

Jessica Ring, PMCT, My Fantastic Friend, Ellicott City, MD

dog

Photo courtesy of Jessica Ring

“One of my favorite tricks is ‘Chill,’ in which the dog rests his chin on the ground or on some other designated surface such as someone’s lap,” Ring says. “This is a simple and great trick to teach a therapy dog, or one who is on crate rest. I taught it to my dog after he had hip replacement surgery. It’s useful in the car or to help a dog relax – and it’s also ridiculously adorable.”

To teach this trick, Ring also uses shaping:

– Start with the dog in the down position and wait for any tiny movement of the head, eyes, or ears toward the ground. Click and deliver the treat on the ground.

– Repeat several times, until you are sure your dog has caught on (you see him offering small but deliberate movement toward the ground), and then hold out for a slightly larger movement.

– Keep repeating this process over the course of multiple short sessions, until your dog is resting his chin on the ground.

– Once you get to the point where your dog’s chin is resting on the ground, click and treat after just a split second.

– After several repetitions, gradually build duration over time by waiting just a hair longer before clicking/treating. Be sure that you are clicking and treating frequently. If your dog seems to be getting frustrated or you are not clicking very frequently, back up a few steps and work there a bit longer before increasing your expectations.

Endless Possibilities

The tricks described here can get you started, and further possibilities are endless! Ask whether your local dog trainer teaches a trick class. Search Youtube for “dog tricks” to see more dogs doing more tricks than you ever thought possible. Check out Kyra Sundance’s books – 101 Dog Tricks: Step-By-Step Activities to Engage, Challenge, and Bond With Your Dog and 101 Dog Tricks, Kids Edition, both available from Dogwise.com. But most important, remember to have fun training your dog. If you do that . . . it’s all tricks!

dog training

Author Pat Miller, CBCC-KA, CPDT-KA, is WDJ’s Training Editor. She and her husband Paul and their four dogs live in Fairplay, Maryland, site of her Peaceable Paws training center, where Pat offers dog-training classes and courses for trainers. Miller is also the author of many books on positive training. Her two most recent books are Do Over Dogs: Give Your Dog a Second Chance at a First-Class Life, and How to Foster Dogs: From Homeless to Homeward Bound.

The post Have Fun Training Your Dog New Tricks! appeared first on Whole Dog Journal.

Leave a comment:

Please note, comments must be approved before they are published

Other articles:

10 DIY tips for sculpting custom character parts with ModiBot

ModiBot has become a critical starting point for many people's creative projects, including stopmotion animation, scene photography, custom action figures, and both digital and hands-on character design.

More and more, creators want to design and sculpt their own ModiBot-compatible parts. This is the best place to start.

 

1. Match the correct ModiBot kit to your sculpting material

Not all ModiBots work with certain materials. Once you have determined what material you'd like to sculpt with, it's best to choose the ModiBot kit that supports sculpting that those materials. **Its possible that there is no ModiBot kit to support the material you are most familiar with.

CAUTION: Avoid using oil or plastic-based clays with the classic MO kit because these will make the plastic (especially the joints) brittle and prone to breakage.

ModiBot Mo, the original ModiBot kit, is made of PETG plastic like water and soda bottles. Its a tough durable plastic, but it doesn't react well to the chemicals or solvents in some sculpting materials.

Original Mo kit works best with- 2-part epoxy, Masking or washi tape, 3Doodler or other handheld 3d filament extruders.

ModiBot Mo+ (plus) kit is made of durable polypropylene plastic and is more durable when used with some paints and solvents. This toughness, especially when heated, allows Mo+ kits to be used with polyclay and a wider variety of materials.

Mo+ works best with- Polyclay compounds (like Fimo or Sculpey), 2-part epoxy, masking or washi tape, 3Doodler

      2. Assemble and test all your joints before starting

      Ball joints create a lot of pressure on their first assembly. Make sure you assemble the figure and test the movement of all the joints prior to sculpting. This will prevent you from starting a sculpt on a part that is already broken or weak.

      BONUS TIP: If a part cracks or breaks during assembly, no worries, we will replace them. Contact us at mo@modibot.com with a picture of your broken part (so we know exactly which part and color you need) and your shipping address. We'll get a replacement out in the mail to you asap!

         3. Try a test part to get a feel for your materials and process

        ModiBot Mo and Mo+ kits both come with extra ball and socket parts so you can try your hand before committing to a single body part. This is especially smart for working on epoxy and polyclay projects due to the amount of time you will commit to the project. T

        BONUS TIP: These extra ball and socket parts can also be used to create your own designs for heads, hands, feet or even large elements like extra arms or wings!

        4. Consider the size and weight of your pieces

        ModiBot joints are strong and durable when assembled, but they have a limit to their ability. Creating excessively long or heavy parts can reduce the effectiveness of each joint. A general rule of thumb is- the longer the part, the more you should reduce its weight.

        If your are considering large, dynamic parts like long arms or wings, do some testing with materials to make the part weight more manageable. Aluminum foil or wire can be a simple way to create structure or mass without creating a lot of weight.

        BONUS TIP: Large hands/feet or hand-held accessories can put the most stress on your ModiBot joints. Consider fabricating large accessories with balsa wood or styrene 

        5. Work each sculpted part as a separate element

        Most sculpting is worked as a single integral piece. If you are wanting to maintain the movement of the joints, it's best to work each part as a singular element. This approach makes it a bit tougher to see how the entire sculpt will look, but it will prevent you from destroying a bunch of work as you try to unsnap connected parts.

        6. Work in layers

        Developing a process is important, and one of the most important ways to manage the work is to take small steps, this will allow you to make improvements and modifications as you go vs. trying to get each part right on the first try.

        Working slowly allows you to work the entire design more as a whole than by finishing each part and then moving on to the next.

        BONUS TIP: One additional benefit of working in layers is that you can start with a rough sculpt of each part to get a feel for the proportion of the piece. Roughing out your design in bunched up aluminum foil can help you get a feel for each part's size and proportion.

        7. Allow clearance for sockets to flex

        Its best to leave room around the sockets so they can flex as you assemble the joints. When you bury the sockets in dense material it can prevent you from assembling all your work. Its best to leave at least 1-3 mm of socket material showing surrounding each joint.

        BONUS TIP: Be careful of making your sculpt too thin surrounding your sockets. Some materials may not be as flexible as the socket material, causing thin layers of material to crack and flake-off during part assembly.

        8. Do Not bake parts while assembled

         If you are using polyclay and heating your parts, the most important thing to remember is- DO NOT BAKE YOUR PARTS WHILE THEY ARE ASSEMBLED. This WILL stretch your joints and prevent them from maintaining a tight grip. No one wants floppy joints (unless you are trying to make a marionette that is. ;)

        BONUS TIP: If you are sculpting figures WITHOUT joints, ModiBot Mo+ works great as a full-figure sculpting armature. This approach allows you to define a great pose using the Mo figure and then burying Mo inside of a full-body sculpt. If you choose to work this way, it can be best to define your pose and then use some glue to 'lock' the joints in place before adding your sculpting medium.

        9. Always bake parts at the recommended temperature

        The ModiBot Mo+ kit has been tested to around 280 degrees F. When sculpting in polyclay, follow the recommended baking instructions for your material type. Using a heat gun or baking the parts at higher temperatures could damage the look and/or function of the parts. For best results, avoid over-heating the parts. 

        WARNING!: Use extreme caution when using an oven. Handling hot parts can cause burns. Use tongs or an oven mitt when handling hot parts.

        10. Whooops! Salvaging a part

        Accidents happen. Parts may get dropped and crack, joints may get over-stretched or we may just find out that the part we made is too heavy to allow the joints to remain posable. When those accidents happen, you should try to save the work you have done.

        It's possible to cut a ModiBot part out of the original sculpt by carefully using plastic snips. Cutting off one end of the part (socket or ball) can allow you too free the sculpted piece from the ModiBot armature. In some cases you may be able to cut the part in half using a small modeling or coping saw. Its best to use a vise and hand protection when separating a sculpt from its armature.

        Once you have freed the sculpted portion you can make modifications and reattach to another ModiBot part.

        Thanks for tuning-in. Watch this space for more creative project tips and best of luck on your next project!

        New 3d printable, ModiBot 'Character Creator' parts released at Tinkercad.com

        Just in time for the New Year, ModiBot has released a variety of new 3D printable action accessories, storytelling props and rigging fixtures for stopmotion animation.

        Each image has a 3d viewer that will allow you to orbit around the items and zoom in to see the details. Just click the title to 'Copy and Tinker' them or just download the 3d print files from our profile at Tinkercad.com or stop by and check out our Thingiverse designs for even more printable ModiBot files.

        Martial Arsenal- A slew of Japanese, printable weapons for your next training video or streetfight, including new wrapped staff accessory.

         

        Arm/Leg sleeve set- Add some bulk to your 'bots, or just a bit of color with these snap-on arm and leg covers.

         

        Tutu- Yes, a tutu! How many weapons and male-themed accessories have we made? It's time we started to introduce some accessories for animating a wider variety of diverse and spectacular feats of human physicality.

         

        Buccaneer theme accessory set- Shiver me timbers! Need some pirate-themed props and costuming for your Mo. Here's a bit to get you started.

         

        Screw-mount base for stopmotion- Now you can print your own secure surface mount for creating an external animation rig. It has a ball attachment for using extra arm and leg parts for capturing action cycles and acrobatics.

         

        Umbrella kit- Last, but not least, we've had a surprising amount of requests for an umbrella. Maybe we'll get to some amazing 'Singin' in the Rain' shorts? Who knows?

        Vote to help decide the future of ModiBot!

        ModiBot is in full evolution mode! Click the link below for a quick survey to help decide the types of ideas we'll pursue in the future.

        Its important that we get as much feedback as possible, so once you have completed the survey, please share with any friends who you think may be interested.

        Click to VOTE NOW!

        How to make your own DIY ModiBot hero

        The fun part about ModiBot is that it can be anything you want it to be. With just a few pieces of colored cloth you can outfit your 'Bot and send him off on any number of adventures.

        This kit was designed to enable character creation across a variety of known pop-culture characters, traditional hero archetypes, or to use as a jumping-off point for designing your own hero.

        Its quick to make with some materials you might have around the house and really easy to modify to add your own personal touches. It can also be used as a fun design exercise for groups of kids (or kids at heart) for school or birthday parties. We also have premade kits in variety of colors available in our shop.

        Let's get started.

        Heres a quick list of materials-
        • Scissors (or rotary cutter)
        • one 9x12 in. sheet of felt
        • one 4 in. zip tie
        • one paper lollipop stick

           

          Step 1: Ideate and plan your design-

          Depending on the color of your bot, you might go in a variety of directions, but, as an example, let's say you have a bright green ModiBot you want to outfit.

          There are a lot of known characters that are green and could be easy to design with this kit, like Peter Pan or Robin Hood.

          There are also character archetypes that could be fun to build by starting with green, like an elven sorcerer or jungle-camoflaged ninja.

          Think for a few seconds and let your mind wander as you think of ideas. You might even do a quick drawing of your design using our downloadable  Character Design Template.

          Step 2: Cut your felt pieces-

          Depending on whether you are going to match the existing pattern or make a design of your own, you can start by creating the strips that will be used for the tunic and sash.

          How to make your own DIY ModiBot hero

          Cut a 1/2 inch strip down the long side of the 9x12 inch felt sheet. This will give you a strip 1/2 inch by 12 inches.

          How to make your own DIY ModiBot hero

          Starting at one end of the strip, measure 4 1/2 inches and cut straight across the strip using the scissors. Now, do the same thing again, measure 4 1/2 inches down the strip and cut.

          This should leave you with 2 pieces measuring 4 1/2 inches and a leftover piece measuring 3 inches.

          Step 3: Attach your pieces to the figure

          This part can be a bit tricky, so it’s best to start by sliding the end of the zip tie into the slot until you hear or feel the first few clicks.

          How to make your own DIY ModiBot hero

          Then take the two longer strips and fold them over the top of the figure’s shoulders and cross-cross them. It’s easy to use your finger and thumb to hold the strips into place.

          How to make your own DIY ModiBot hero

          Now, point your figure’s toes and slide the zip tie up the legs to the waist.
          Now, you can slip the smaller strip underneath the zip tie belt and wrap it around the figure’s waist.

          How to make your own DIY ModiBot hero

          Next, slowly tighten the zip tie while holding every thing in place. It’s best to leave some slack in the belt to allow you move things around to get them just right before tightening completely.
          Lastly, trim off the extra bit of the zip tie.

           

          Step 4: Decorate your stick

          I chose here to make mine into a sword with a metal blade and black handle, but you are free to make the stick into anything you want.

          Step 5: Complete the design and start posing!

          How to make your own DIY ModiBot hero

           

          Making female figures with the Moli Modifier upgrade kit

          We are constantly being asked for some parts that more 'female' to complement to Mo. During our Kickstarter campaign, we came up with the idea to make a small set of female parts that you could mix with Mo to get a whole new female figure and we called her Moli.

          Originally, the only way to get Moli was as made-to-order kit from our ModiBot Custom shop. We have been selling the Basic Moli upgrade (which consists of a hip and torso) for several years, but, for the first time, we're now selling the Deluxe Moli Modifier kit here in our shop.

          The kit, available in white, is 3d printed in Polyamide, which is a form of polyester and comes on a single frame to make it easy to process and ship. In addition to the torso and hip parts found in the Basic set, the Deluxe Modifier set includes hands, feet, and ponytail, 7 parts in all.

          When you receive the kit, it is best to trim the parts off the frame using small wire snips, cuticle scissors, or, if you are careful, an exacto knife. (See the green lines on the image below to know where to cut).

          Moli Modifier Frame

          Once you've trimmed them off the frame, these 3d printed parts (shown in white) can then be added to various parts from the Mo figure (shown above in pink) to complete your Moli.

          As with Mo, Moli can be used for any number of creative projects, from drawing practice, to DIY character crafts, to stopmotion animation. Where she goes is driven by your imagination.

          ModiBot returns to Bay Area Maker Faire 2018

          We're ramping up for an appearance at the Bay Area Maker Faire, May 18-20.

          As many of you know, we launched at the Greatest Show (and Tell) on Earth in 2013, with some prelim samples of our molded figs and limited run of Maker Myke figures printed specifically for the show, all just prior to our launching our Kickstarter. We love the energy, optimism and curiosity it brings out in people. 

           

           

          We'll be exhibiting all sorts of new kits and accessories available for the first time in-person. We'll have the SpyBorg, Mechanoid Zero and Meta upgrade frame, ModiRaptor, Moli Modifier Frame, Human ExoSkin, and a variety of assorted weapons, accessories and figure upgrades.

          We'll also be featuring the MoBility Stopmotion torso and have a new Stopmotion Starter Kit on-hand for aspiring filmmakers and effects gurus who are looking for a way to take their first steps in visual storytelling. It was a hit at the East Bay Maker Faire last fall, so we'll have more on-hand

          We'll also have an activity/customization station for kids to come by and create some DIY activities like creating your own ModiBot characters with the character design template, making and detailing swords, hands-on ModiBot costuming and drawing Coats-of-Arms for their DIY shields.

          And, lastly, the MakerBot Rep 2 will be there churning out a selection of the free ModiBot models available on Thingiverse

          The show starts Friday, May 18 (afternoon only) and then goes all weekend. We're looking forward to it and we hope to see you there!